Configuring WiFi

WiFi

The Smart Si thermostat supports WiFi 802.11 b/g/n. Use the Advanced Configuration option in the WiFi menu to configure your network parameters. Choose the network from the list or manually add a new one (i.e. if your network does not broadcast its SSID).

You will then be able to view and configure the following network parameters:

  • DHCP (select Disabled to use a static IP Address; if unsure, leave DHCP Enabled)
  • SSID
  • Encryption (WEP, WEP128, WPA, or WPA2)
  • Password (if encryption is used)
  • WiFi Channel
  • IP Address and  IP Subnet
  • Gateway
  • Primary and Secondary DNS 

If you need to specify your Smart Si thermostat’s MAC address in your router’s configuration, you can obtain it from the About menu.

 

To configure WiFi manually:  From the Home screen, press MENU. Select WiFi. Adjust the network options for your home network.