ecobee

What commands can I use with the Google Assistant?

Here's a list of commands for your ecobee thermostat and switch+ to control with Google Assistant.

Switch+

Turning your switch On or Off

  • Ok Google, turn the <switch name> On
  • Ok Google, turn the <switch name> switch On
  • Hey Google, turn the <switch name> off
  • Ok Google, turn off all switches

Getting the state of your switch+

  • Ok Google, is the <switch name> On/Off?
  • Hey Google, are my switches off?

ecobee Smart Thermostats

Getting the Temperature / Set-point / Mode of a Thermostat

  • Ok Google, what is the current temperature in the <thermostat name>?
  • Hey Google, what's the <thermostat name> set to?
  • Ok Google, what's the temperature of my thermostat?

Getting the Temperature of a Room Sensor

  • Ok Google, what's the current reading on the <sensor name> sensor?
  • Ok Google, what does the <room name> <sensor name> say?

Setting the Temperature

  • Ok Google, set the temperature in the <thermostat name> to <temperature>
  • Ok Google, set the temperature to <temperature>

Increasing / Decreasing the Temperature 

  • Hey Google, increase the temperature in the <thermostat name>
    • This will result in a 5 degrees F (3 degrees C) increase from the current set-point
  • Hey Google, decrease the temperature in the <thermostat name>
    • This will result in a 5 degrees F (3 degrees C) decrease from the current set-point
  • Hey Google, increase the temperature in the <thermostat name> by <number> degrees
  • Hey Google, decrease the temperature in the <thermostat name> by <number> degrees

Getting Away / Home / Sleep Comfort Settings 

  • Ok Google, what's the <thermostat name> comfort setting?

Setting Away / Home / Sleep Comfort Settings

  • Ok Google, set <thermostat name> comfort setting to <Away, Home, Sleep> 

Resuming the Schedule

  • Hey Google, turn off the <thermostat name> hold
  • Ok Google, turn on the <thermostat name> schedule

Running the Fan

  • Ok Google, turn the <thermostat name> fan on

Changing Mode

  • Ok Google, turn on <heat, cool, automatic> mode in the <thermostat name>
  • Hey Google, change to <heat, cool, automatic> mode in the <thermostat name>

Getting the Equipment Status 

  • Ok Google, is the <thermostat name> <equipment type> <on, off>? 

Was this article helpful?

Have more questions? Submit a request